Manage Device Security
519
M4300 Series and M4300-96X Fully Managed Switches User Manual
For information about creating an enable authentication list, see Configure a Login
Authentication List on page 501.
To configure the Telnet authentication list:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
The login window opens.
3. Enter the user name and password.
The default admin user name is
admin and the default admin password is blank, that is,
do not enter a password.
4. Click the Login button.
The System Information page displays.
5. Select Security >
Access > T
elnet.
6. From the Login Authentication List menu, select which authentication list must be used to
log in through
Telnet.
The default value is networkList.
7. From the Enable Authentication List menu, select which authentication list must be used
to log in through
Telnet for the privileged EXEC mode.
The default value is enableList.
8. Click the Apply button.
Your settings are saved.
To Next Page
Loading...
