NETGEAR M4300 User Manual

Manage Device Security
553
M4300 Series and M4300-96X Fully Managed Switches User Manual
The login window opens.
3. Enter the user name and password.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
4. Click the Login button.
The System Information page displays.
5. Select Security > T
raffic Control > Private VLAN > Private VLAN Host Interface
Configuration.
6. In the
Host Primary VLAN field, set the primary VLAN ID for Host Association mode.
The range of the VLAN ID is 2–4093.
7. Use Host Secondary VLAN
to set the secondary VLAN ID for Host Association mode.
The range of the VLAN ID is 2–4093.
8. Click the Apply
button.
Your settings are saved.
The following table describes the nonconfigurable information displayed on the page.
Table 202. Private VLAN Host Interface Configuration
Field Description
Interface Select the physical or LAG interface.
Operational VLAN(s) The operational VLANs.

NETGEAR M4300 Specifications

General

Model	M4300
Form Factor	Rack-Mountable
Layer	Layer 3
Stackable	Yes
Managed	Yes
Memory	Varies by model
Flash Memory	Varies by model
Warranty	Lifetime
Ports	Varies by model (24 or 48 ports)
PoE	Available on some models
Port Speed	10/100/1000 Mbps, 10Gbps on uplinks
Forwarding Rate	Varies by model
Jumbo Frame Support	Yes
VLAN Support	Yes
Quality of Service (QoS)	Yes
Security Features	ACLs, 802.1X
Dimensions	Varies by model
Weight	Varies by model
Operating Temperature	0° to 50° C (32° to 122° F)
Power Supply	Internal
Uplink Ports	Varies by model (SFP/SFP+ or 10G SFP+)