Routing
323
M4300 Series and M4300-96X Fully Managed Switches User Manual
• Enables tagging on selected ports if the port is in another VLAN. Disables tagging if a
selected port does NOT exist in another VLAN.
• Excludes ports NOT selected from the VLAN.
• Enables routing on the VLAN using the IP address and subnet mask entered.
To use the VLAN Static Routing Wizard:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
The login window opens.
3. Enter the user name and password.
The default admin user name is
admin and the default admin password is blank, that is,
do not enter a password.
4. Click the Login button.
The System Information page displays.
5. Select Routing> VLAN > VLAN Static Routing W
izard.
6. Use VLAN ID
to specify the VLAN identifier (VID) associated with this VLAN.
The range of the VLAN ID is 1 to 4093.
7. Use Ports to display selectable physical ports and LAGs (if any).
Selected ports are added to the routing VLAN. Each port has three modes:
• T
(Tagged). Select the ports on which all frames transmitted for this VLAN are
tagged.
The ports that are selected are included in the VLAN.
• U (Untagged). Select the ports on which all frames transmitted for this VLAN are
untagged. The ports that are selected are included in the VLAN.
• BLANK(Autodetect)
. Select the ports that can be dynamically registered in this VLAN
through GVRP.
This selection has the effect of excluding a port from the selected
VLAN.
8. Use the LAG Enabled option to add selected ports to VLAN as a LAG.
To Next Page
Loading...
