OSPF and OSPFv3
389
M4300 Series and M4300-96X Fully Managed Switches User Manual
The login window opens.
3. Enter the user name and password.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
4. Click the Login button.
The System Information page displays.
5. Select Routing > OSPFv3 >
Advanced > Interface Configuration.
6. Use one of the following methods to select an interface:
• In the
Go To Interface field, enter the interface in the unit/slot/port format and click on
the
Go button.
• Next to the Interface column, select the check box for the interface that you want to
configure.
7. In the Area ID field, enter the 32-bit integer in dotted-decimal format that uniquely identifies
the OSPFv3 area to which the selected router interface connects.
If you assign an area ID that does not exist, the area is created with default values.
8. Configure the Admin Mode by selecting the Enable or Disable option from the list.
The default value is Disable. You can configure OSPFv3 parameters without enabling
OSPFv3 admin mode, but the settings do not take ef
fect until you enable admin mode.
The following information is displayed only if admin mode is enabled:
• State
• Designated router
• Backup designated router
• Number of link events
To Next Page
Loading...
