DGS-6604 m show cpu-protect safeguard
CLI Reference Guide
586
show cpu-protect safeguard
Use this command to display the settings and status of Safeguard Engine.
show cpu-protect safeguard
Syntax
Description
none
Default none
Command Mode Privileged EXEC mode
Usage Guideline The command show cpu-protect safeguard is used to display the settings and
status of Safeguard Engine.
Example The following example shows how to display the settings and current status of
Safeguard Engine.
Switch# show cpu-protect safeguard
Safeguard Engine State : Disabled
Safeguard Engine Status : Normal
Utilization Thresholds:
Rising : 50%
Falling : 20%
Switch#
To Next Page
Loading...
