DGS-6604 m show system
CLI Reference Guide
766
show system
Use this command to display information about the Switch system.
show system [cpu] [protocol-state]
Default None
Command Mode User EXEC or any configuration mode
Usage Guideline This command displays information about the overall Switch system. Use
keyword of protocol-state to show the information about the administrative and
operational state of the supported protocols.
Example This example on the following page shows how to display the Switch information
Syntax Description
cpu (Optional) Shows the information about the CPU utilization of the management
control unit.
protocol-state (Optional) Shows the information about supporting protocols.
To Next Page
Loading...
