DGS-6604 m clear vlan-tunnel ctag-mapping dynamic
CLI Reference Guide
116
clear vlan-tunnel ctag-mapping dynamic
Use this command to clear all dynamically learned mappings between customer
VLAN tags and source IPs.
clear vlan-tunnel ctag-mapping dynamic
Syntax None
Default None
Command Mode User EXEC
Usage Guideline This command is used to clear all dynamically learned mappings between a
customer VLAN tag and source IP in the switch software. When the setting of a
VLAN tunnel is changed, as for example its interface-type or TPID, then the new
setting could for example cause the system to send out control packets with the
wrong customer VLAN tag. In this situation, use this command to clear the
incorrect dynamically learned mapping entries to re-learn the correct customer
VLAN tag mapping with the source IP.
Examples This example shows how to clear all dynamically learned customer VLAN tag
mappings.
Switch# clear vlan-tunnel ctag-mapping dynamic
Switch#
To Next Page
Loading...
