DGS-6604 m show ip ospf interface
CLI Reference Guide
674
show ip ospf interface
Use this command to display interface information for OSPF.
show ip ospf interface [IFNAME]
Default None
Command Mode User EXEC
Usage Guideline Use this command to display interface information for OSPF. If no IFNAME is
specified the OSPF information for all interfaces will be displayed.
Example The following example on the next page is a sample output of this command:
Syntax Description
IFNAME (Optional) Specifies the interface type of the interfaces to display the OSPF
information for.
To Next Page
Loading...
