DGS-6604 m terminal timeout
CLI Reference Guide
898
terminal timeout
Use this command to setup a timeout value, which upon its expiry, will auto-
logout the terminal session.
terminal timeout {never| 2_minutes| 5_minutes| 10_minutes| 15_minutes}
Default never
Command Mode Privilege EXEC
Usage Guideline This timer specifies the length of the session idle time allowed. After this idle
timer expires then the terminal session will be auto-logged out. The timer
operates regardless of whether the session is established by direct serial
connection, telnet connection, or SSH connection.
Examples This example shows how to setup the terminal session to never timeout.
Verify the settings by entering the show running-config command.
Syntax Description
never Specifies that the terminal session will never timeout.(the default setting).
2_minutes Specifies that when the session is idle over 2 minutes, the terminal will auto
logout.
5_minutes Specifies that when the session is idle over 5 minutes, the terminal will auto
logout.
10_minutes Specifies that when the session is idle over 10 minutes, the terminal will auto
logout.
15_minutes Specifies that when the session is idle over 15 minutes, the terminal will auto
logout.
Switch# terminal timeout never
To Next Page
Loading...
