DGS-6604 ipv6 address (management port)
CLI Reference Guide
333
ipv6 address (management port)
Use this command to set the IPv6 address of the Management Port. Use the no
form of this command to set the IPv6 address of the Management Port to the
default value.
ipv6 address IPv6-ADDRESS/PREFIX-LENGTH
no ipv6 address
Default Default IPv6 address is: ::/0.
Command Mode Management interface configuration
Usage Guideline Users can manage the system by accessing this IPv6 address. Use the no ipv6
address command to restore the default IPv6 address
Example This example shows how to set 2000::1/64 as the IPv6 address of the
Management Port.
Verify the settings by entering the show mgmt-if command
Syntax Description
IPv6-ADDRESS IPv6 address, X:X::X:X
PREFIX-LENGTH Prefix Length.
Switch(mgmt-if)#
Switch(mgmt-if)#ipv6 address 2000::1/64
To Next Page
Loading...
