DGS-6604 m show running-config
CLI Reference Guide
749
show running-config
Use this command to display the contents of the current running configuration
file.
show running-config
Syntax None
Default None
Command Mode Privilege EXEC at level 15
Usage Guideline The show running-config command output for the current running system
configuration.
Example The following example shows how to display the contents of the current running
configuration file:
Switch:15(config)#show running-config
Building configuration...
Current configuration:
version 1.00.001
#Slot Module-Type Model
#---- ------------------------------------ -------------
# 1 Management Control Module CMU-Card
# 2 - -
# 3 - -
# 4 48 ports 1000Base-T 48T-IOCard
!
!
!
To Next Page
Loading...
