DGS-6604 m show ip pim
CLI Reference Guide
679
show ip pim
Use this command to show the PIM global information.
show ip pim
Syntax None
Default None
Command Mode User EXEC or any configuration mode
Usage Guideline Use this command to display the global information of PIM.
Example The following example displays PIM global information.
Switch##show ip pim
PIM Configurations:
Register Checksum Include Data: Disabled, group-list: (None)
Register Suppression Time : 60 seconds
Accept Register Group list : pim-acp-reg
RP Address
90.1.1.1, group-list: static-rp
RP Candidate
vlan100, group-list: rp-cand, interval: 60, priority: 192
BSR Candidate
vlan100, hash-mask-length: 30, priority: 1
To Next Page
Loading...
