DGS-6604 m show route-map
CLI Reference Guide
748
show route-map
Use this command to display static route maps,
show route-map [MAP-NAME]
Default None
Command Mode Privileged EXEC
Usage Guideline The command displays all the ACL-specific information that pertains to the route
map in the same display without having to execute a show route-map command
to display each ACL that is associated with the route map.
Example This example shows how to display static route maps for the entry "myPolicy"
Syntax Description
MAP-NAME (Optional) Name of a specific route map.
Switch# show route-map myPolicy
route-map myPolicy, permit, sequence 10
Match clauses:
as-path R1
Set clauses:
weight 120
Switch#
To Next Page
Loading...
