DGS-6604 m aaa authorization
CLI Reference Guide
29
aaa authorization
Use this command to enable the authorization function. Use the no form of the
command to disable AAA authorization.
aaa authorization
no aaa authorization
Syntax None
Default Disabled
Command Mode Global configuration at privilege level 15
Usage Guideline When the AAA authorization function is enabled, the system will use
configuration settings authorized by the RADIUS server in addition to the
RADIUS server authentication function. Settings can include VLAN assignment,
user priority assignment and bandwidth assignment.
If AAA authorization is disabled, the system only accepts the authentication
function from the RADIUS server and ignore any additional configuration settings
supplied by the RADIUS server.
Example This example shows how to enable the authorization:
Verify the settings by entering the show system protocol-state command.
Switch# configure terminal
Switch(config)# aaa authorization
To Next Page
Loading...
