DGS-6604 m clear port-security
CLI Reference Guide
113
clear port-security
To delete all of the secured MAC addresses, except for manually configured
secured MAC addresses, from the MAC address table, use the clear port-
security command.
clear port-security [{address MAC-ADDR } | {interface INTEFACE-ID }] [vlan VLAN-ID]
Default None
Command Mode Privileged EXEC
Usage Guideline This command clears secure MAC address that are auto-learned only and not
manually configured MAC addresses.
If the clear port-security command is entered without adding any keywords or
arguments, the switch removes all the secure MAC addresses from the MAC
address table.
If the clear port-security interface INTERFACE-ID command is entered, all the
secure MAC addresses auto-learned on the specified interface are removed from
the MAC address table.
Example This example shows how to remove a specific secure address from the MAC
address table:
This example shows how to remove all the secure MAC addresses auto-learned
on a specific interface:
Syntax Description
address MAC-ADDR (Optional) Deletes the specified secure MAC address auto-learned.
Interface INTEFACE-
ID
(Optional) Deletes all secure MAC addresses auto-learned on the specified
physical.
vlan VLAN-ID (Optional) Deletes the specified secure MAC address from the specified VLAN.
Switch# clear port-security address 0080.0070.0007
Switch#
Switch# clear port-security interface eth3.1
To Next Page
Loading...
