DGS-6604 m show ip ospf border-routers
CLI Reference Guide
658
show ip ospf border-routers
Use this command to display the ABRs and ASBRs for the OSPF instance.
show ip ospf border-routers
Syntax None
Default None
Command Mode User EXEC
Usage Guideline Use this command to display the ABRs and ASBRs information.
Example This is a sample output from the show ip ospf border-routers command
Switch#show ip ospf border-routers
OSPF process internal Routing Table
Codes: i - Intra-area route, I - Inter-area route
i 10.47.65.181 [1] via 47.65.51.2, vlan51, ABR, ASBR, TransitArea 0.0.0.1
i 10.47.65.182 [1] via 47.65.52.2, vlan52, ABR, ASBR, TransitArea 0.0.0.1
i 10.47.65.183 [1] via 47.65.53.2, vlan53, ABR, ASBR, TransitArea 0.0.0.2
i 10.47.65.184 [1] via 47.65.54.2, vlan54, ABR, ASBR, TransitArea 0.0.0.2
i 47.65.131.111 [2] via 47.65.52.2, vlan52, ASBR, TransitArea 0.0.0.1
i 47.65.151.111 [2] via 47.65.53.2, vlan53, ASBR, TransitArea 0.0.0.2
Total Entries: 6
Switch#
To Next Page
Loading...
