DGS-6604 m clear mac address-table
CLI Reference Guide
112
clear mac address-table
Use the clear mac address-table command to delete from the MAC address
table:
• specific dynamic address,
• all dynamic addresses on a particular interface,
• all dynamic addresses,
• or all dynamic addresses on a particular VLAN.
clear mac address-table {dynamic [address MAC-ADDR | interface INTERFACE-ID | vlan
VLAN-ID] }
Default None
Command Mode Privileged EXEC
Usage Guideline When using the address MAC-ADDR argument, only the dynamic entries will be
cleared.
Example This example shows how to remove a specific MAC address from the dynamic
address table:
Verify the information was deleted by entering the show mac address-table
command.
Syntax Description
address MAC-ADDR Delete the specified dynamic MAC address.
interface
INTERFACE-ID
The specified interface can be a physical port or port-channel.
vlan VLAN-ID (Optional) Specifies the VLAN ID; valid values are from 1 to 4094.
Switch# clear mac address-table dynamic address 00:08:00:70:00:07
To Next Page
Loading...
