DGS-6604 m show ip route summary
CLI Reference Guide
697
show ip route summary
To display the current state of the routing table, use the show ip route summary
command.
show ip route summary
Syntax
Description
None
Default None
Command Mode User EXEC or any configuration mode
Usage Guideline None
Example The following is sample output from the show ip route summary command:
Switch#show ip route summary
IP routing table name is Default-IP-Routing-Table(0)
IP routing table multi-paths state is enabled
IP routing table configured maximum-paths is 6
IP routing table maximum-paths is 6
Route Source Networks
connected 2
rip 1
bgp 2
Total 5
FIB 3
multi-path 0
To Next Page
Loading...
