DGS-6604 m show ip dhcp relay information trusted-sources
CLI Reference Guide
630
show ip dhcp relay information trusted-sources
Use the show ip dhcp relay information trusted-sources command to display
all interfaces configured to be a trusted source for the Dynamic Host
Configuration Protocol (DHCP) relay information option, .
show ip dhcp relay information trusted-sources
Syntax None
Default None
Command Mode User EXEC or any configuration mode
Usage Guideline Display the DHCP relay agent configuration.
Example The following is sample output when the ip dhcp relay information trusted
command is configured. Note that the display output lists the interfaces that are
configured to be trusted sources.
Switch# show ip dhcp relay information trusted-sources
List of trusted sources of relay agent information option:
VLAN100 VLAN200 VLAN300 VLAN400 VLAN500
Total Entries: 5
Switch#
To Next Page
Loading...
