DGS-6604 m neighbor description
CLI Reference Guide
445
neighbor description
Use this command to associate a text description with a neighbor. Use the no
form of the command to remove the description.
neighbor {IP-ADDRESS | PEER-GROUP-NAME} description TEXT
no neighbor {IP-ADDRESS | PEER-GROUP-NAME} description
Default None
Command Mode Router configuration
Usage Guideline When a BGP peer group is specified using the PEER-GROUP-NAME argument,
all the members of the peer group inherit the characteristics configured with this
command.
Example The following example shows how to configure a description for the neighbor
172.16.10.10:
Verify the settings by entering the show ip bgp neighbor command.
Syntax Description
IP-ADDRESS Specifies IP address prefixes.
PEER-GROUP-NAME Name of a Border Gateway Protocol (BGP) peer group.
TEXT Specifies a descriptive string for the neighbor. The maximum length is 80
characters. The syntax is a general string that allows space.
Switch(config)# router bgp 65100
Switch(config-router)# neighbor 172.16.10.10 description ABC in China
To Next Page
Loading...
