DGS-6604 m show lldp management-address
CLI Reference Guide
823
show lldp management-address
To display the LLDP management address information, use the show lldp
management-address in user EXEC mode.
show lldp management-address [IP-ADDRESS | IPV6-ADDRESS]
Default Not applicable
Command Mode EXEC mode or any configuration mode
Usage Guideline show lldp management-address is issued without arguments, all configured
LLDP management address(es) will be displayed.
Example The following is sample output from the show lldp management-address
command to display the LLDP management address information for
192.168.254.10:
This example shows how to display all management address information:
Syntax Description
IP-ADDRESS (Optional) Display the LLDP management for specific IPv4 addresses.
IPV6-ADDRESS (Optional) Display the LLDP management information for specific IPv6
addresses.
Switch> show lldp management-address 192.168.254.10
Address 1:
-----------------------------------------------------------------------
Subtype : IPv4
Address : 192.168.254.10
IF type : IfIndex
OID : 1.3.6.1.4.1.171.10.36.1.11
Advertising Ports :
eth3.1-3.5, eth3.7, eth4.10-4.20
Switch>
To Next Page
Loading...
