DGS-6604 m show vlan-tunnel ctag-mapping
CLI Reference Guide
784
show vlan-tunnel ctag-mapping
This command is used to display the state of the dynamically learned customer
VLAN tag mechanism and the static customer VLAN tag mappings.
show vlan-tunnel ctag-mapping {dynamic state | static}
Default None
Command Mode User EXEC or any configuration mode
Usage Guideline Use the show vlan-tunnel ctag-mapping dynamic state command to display
the state of dynamically learned customer VLAN tag mechanism.
Use the show vlan-tunnel ctag-mapping static command to show each static
customer VLAN tag mapping entries that user configured.
Examples This example shows how to display the state of dynamic learned customer VLAN
tag mechanism.
This example shows how to display the VLAN tunnel static customer VLAN tag
mapping entries.
Syntax Description
dynamic state Display the state of dynamic learned customer VLAN tag mechanism.
static Display all static customer VLAN tag mappings.
Switch# show vlan-tunnel ctag-mapping dynamic state
Dynamic ctag-mapping for IPv4 : Disable
Dynamic ctag-mapping for IPv6 : Disable
Switch#
Switch# show vlan-tunnel ctag-mapping static
Destination IP C-VID
------------------------------------------- -------
192.168.10.0/24 233
192.168.20.0/24 155
2011:254::/64 850
------------------------------------------- -------
Total Entries: 3
Switch#
To Next Page
Loading...
