DGS-6604 m show ip dhcp snooping
CLI Reference Guide
634
show ip dhcp snooping
Use this command to display DHCP snooping configuration.
show ip dhcp snooping
Syntax
Description
Not applicable.
Default Not applicable.
Command Mode EXEC mode or any configuration mode.
Usage Guideline Use the command to display DHCP snooping configuration setting.
Example This example shows how to display DHCP Snooping configuration:
Switch# show ip dhcp snooping
DHCP Snooping is enabled.
DHCP Snooping is enabled on VLANs:
Vlan10, vlan15-18
Information option: not allowed
Interface Trusted Rate Limit
---------- ---------- --------------
eth3.1 no 10
eth3.8 no 50
eth3.9 yes
Switch#
To Next Page
Loading...
