D-Link DGS-6600-48TS

DGS-6604 m aaa authentication
CLI Reference Guide
27
A
aaa authentication
Use this command to enable the AAA authentication function (console, telnet,
ssh or http) using the method or methods specified and to create a login list to
specify the application or applications used for system access.
Note: Use aaa group server to first define authentication servers before aaa
authentication can be configured.
aaa authentication [login | enable] [console | telnet | http | ssh] METHOD1 [METHOD2...]
no aaa authentication [login | enable] [console | telnet | http | ssh] METHOD1 [METHOD2...]
Default No aaa authentication, local user authentication is specified for console, telnet,
http, etc. application.
Command Mode Global configuration at privilege level 15
Usage Guideline Use aaa authentication to enable authentication and create a login list to specify
the application or applications used for system access.
If neither login or enable are specified, both are implied. If no application is
specified, all applications (console, telnet, ssh, or http) are assumed valid for
system access.
Syntax Description
login
(Optional) Enable authentication for normal login mode. Enter the console,
telnet, or http keyword. If neither login nor enable are specified, both login and
enable are implied.
enable
(Optional) Enable authentication for normal enable mode. Enter the console,
telnet, or http keyword. If neither login nor enable are specified, both login and
enable are implied.
console
(Optional) Specifies that the type of application used for system access
authentication is console.
telnet
(Optional) Specifies that the type of application used for system access
authentication is telnet.
http
(Optional) Specifies that the type of application used for system access
authentication is http.
ssh (Optional) Specifies that the type of application used for system access
authentication is SSH.
METHOD1
[METHOD2...]
Identifies the list of methods that the authentication algorithm tries in the given
sequence. At least one method must be entered; up to two methods can be
identified by keyword. The keywords for AAA authentication login and enable
configuration methods are described as follows:
• local Uses the local username database for authentication.
• group GROUP-NAME Uses a subset of authentication servers for
authentication as defined by the aaa group server command.