DGS-6604 mm domain-name
CLI Reference Guide
163
domain-name
This command configures the domain name for a DHCP client. Use the no form
of this command to remove the domain name.
domain-name DOMAIN
no domain-name
Default None
Command Mode DHCP pool configuration
Usage Guideline This command configures the domain name for a DHCP client.
Example This example shows how to specify domain name as "dlink.com" in a DHCP
address pool.
Syntax Description
DOMAIN Specifies the domain name.
switch# configure terminal
switch(config)# ip dhcp pool pool1
switch(config-dhcp)# domain-name dlink.com
To Next Page
Loading...
