DGS-6604 mm dot1x user
CLI Reference Guide
184
dot1x user
Use this command to create a local account used for authentication. Use the no
form of this command to delete local accounts.
dot1x user NAME password PASSWORD
no dot1x user [
NAME ]
Default No local account is created.
Command Mode Global configuration
Usage Guideline All accounts can be removed by entering no dot1x user without the NAME
option.
The local database can be used in both port-based and host-based mode.
The maximum number of user accounts is project dependent.
Examples This example creates a local account with a user name. "yourname" and
password "yourpass".
This example deletes a local account with a user name as "yourname".
Verify the settings by entering the show dot1x user command.
Syntax Description
NAME
Specifies the name of a local account used for authentication. The valid length is
from 1 to 32.
The syntax is general string that does not allow space.
password
PASSWORD
Specifies a password for a local account. The valid length is from 1 to 16. The
syntax is general string that does not allow space.
Switch# configure terminal
Switch(config)# dot1x user yourname password yourpass
Switch# configure terminal
Switch(config)# no dot1x user yourname
To Next Page
Loading...
