DGS-6604 m snmp-server view
CLI Reference Guide
856
snmp-server view
Use this command to create or update a view entry for SNMP. And use the no
snmp-server view command to remove a specified SNMP view entry.
snmp-server view VIEW-NAME OID-TREE {included | excluded}
no snmp-server view VIEW-NAME
Default There are two VIEWs set as shown below:
VIEW-NAME OID-TREE View Type
restricted 1.3.6.1.2.1.1 Included
restricted 1.3.6.1.2.1.11 Included
restricted 1.3.6.1.6.3.10.2.1 Included
restricted 1.3.6.1.6.3.11.2.1 Included
restricted 1.3.6.1.6.3.15.1.1 Included
CommunityView 1 Included
CommunityView 1.3.6.1.6.3 Excluded
CommunityView 1.3.6.1.6.3.1 Include
Command Mode Global configuration at privilege level 15
Usage Guideline Use this command to create a view for the MIB object trees.
The view needs to be specified when the snmp-server group command is used
to define a user group.
Syntax Description
VIEW-NAME Label for the view record that being updating or created. The name is used to
reference the record. The valid length for VIEW-NAME is 1 to 32 characters. The
syntax is a general string that does not allow space.
OID-TREE Object identifier of the ASN.1 subtree to be included or excluded from the view.
To identify the subtree, specify a text string consisting of numbers, such as
1.3.6.2.4., or a word such as system.
included (Optional) Configures the OID (and subtree OIDs) specified in the OID-TREE
argument to be included in the SNMP view.
excluded (Optional) Configures the OID (and subtree OIDs) specified in OID-TREE
argument to be explicitly excluded from the SNMP view.
To Next Page
Loading...
