DGS-6604 m show vrrp
CLI Reference Guide
785
show vrrp
This command is used to view the VRRP status.
show vrrp [interface INTERFACE-ID [VRID]]
Default None
Command Mode User EXEC or any configuration mode
Usage Guideline Use this command to view the VRRP information.
Examples On the following page is an example from show vrrp. There are 2 VRID, 7 and 8,
configured in the interface vlan1, a VRID 5 configured in interface vlan2 and a
VRID 1 configured in interface vlan3.
Syntax Description
INTERFACE-ID (Optional) The interface name of a configured IP interface. When the
INTERFACE-ID is specified, the VRRP information that is related to the interface
will be displayed.
VRID (Optional) A configured virtual router identifier.When both INTERFACE-ID and
VRID are specified, the VRRP information that is related to it will be displayed.
The virtual router identifier is configured with the vrrp ip command.
Range is 1 to 255.
To Next Page
Loading...
