D-Link DGS-6600-48TS

DGS-6604 m show mgmt-if
CLI Reference Guide
734
show mgmt-if
Use this command to show the status of the management port, including user
settings and link status.
show mgmt-if
Syntax
Description
None
Default None
Command Mode User EXEC, management interface mode or any configuration mode
Usage Guideline None
Example This example shows how to display the status of the management port.
Switch#show mgmt-if
Management Interface
------------------------
Admin Status: Down
IPv4 Address: 10.1.1.1/8
IPv4 Default Gateway : 10.1.1.254
IPv6 Global Address : 6600::66/64
IPv6 Link-local Address : fe80::40b:ff:fe19:0/64
IPv6 Default Gateway : ::
IP MTU : 1600
Link Status : Down
Switch#