DGS-6604 m login
CLI Reference Guide
406
login
Use this command to login to the switch with a specified username.
login
Syntax None
Default None
Command Mode User EXEC
Usage Guideline Change a login username by using this command.
When logging in using a TELNET connection, if all of the attempts fail, the
connection will be returned to the logout state. For a direct console connection,
the session will also be returned to the logout state.
Example This example shows how to login with username user1.
Switch>login
User Access Verification
Username: user1
Password:
DGS-6604 Chassis-based High-Speed Switch
Command Line Interface
Firmware: 2.01.001
Copyright (c) 2011 D-Link Corporation. All rights reserved.
Switch#
To Next Page
Loading...
