DGS-6604 m show ip ospf host-route
CLI Reference Guide
673
show ip ospf host-route
Use this command to display host-route information for OSPF.
show ip ospf host-route
Syntax None.
Default None
Command Mode User EXEC
Usage Guideline Use this command to display host route information for OSPF.
Example The following is a sample output of this command:
Switch# show ip ospf host-route
Host IP AreaID Cost
-----------------------------------------------
10.3.3.3 0.0.0.5 2
10.3.3.4 0.0.0.1 3
20.3.3.3 0.0.0.25 58
Total Entries: 3
To Next Page
Loading...
