DGS-6604 m show ipv6 protocols
CLI Reference Guide
717
show ipv6 protocols
To display the parameters and current state of the active IPv6 routing protocol
process.
show ipv6 protocols [rip | ospf]
Default If no option is specified, the summary of all running protocols are displayed.
Command Mode User EXEC or any configuration mode
Usage Guideline The information displayed by the show ip protocols command is useful in
debugging routing operations. The output can help identify a router suspected of
delivering bad routing information.
Examples The following is sample output from the show ipv6 protocols ospf command.
Syntax Description
rip (Optional) Herein, RIPng protocol information is displayed.
ospf (Optional) Display OSPFv3 global settings which are related to the overall IP
routing function. It can show the OSPFv3 global setting for the specific process
ID when the input OSPFv3 process tag is in the command.
Switch > enable
Switch # show ipv6 protocols ospf
Routing protocol OSPFv3 Process *null*
Configured Router ID :8.1.2.64
Redistribute route default metric:20
Auto-cost Reference-bandwidth: 100
Distance: (default is 110)
metric-type 2 metric 16777215
Redistributing:
type metric metric_type
-------------------------------------------
connected auto 2
static auto 2
rip auto 2
To Next Page
Loading...
