DGS-6604 m clear arp-cache
CLI Reference Guide
90
clear arp-cache
To remove dynamically created entries from the Address Resolution Protocol
(ARP) cache, use the clear arp-cachecommand in Privileged EXEC mode.
clear arp-cache [interface INTERFACE-ID | IP-ADDRESS]
Default None
Command Mode Privileged EXEC
Usage Guideline This command is used to delete dynamic entries from the ARP cache. The user
can select to delete all dynamic entries, specific dynamic entries, or dynamic
entries that are associated with a specific IP interface.
Example This example shows how to removes all dynamic entries from the ARP cache.
Syntax Description
INTERFACE-ID (Optional) Removes only the ARP table entries associated with this interface
such as for example, vlan100 for the VLAN interface.
IP-ADDRESS (Optional) IP address to clear from the ARP table.
Switch#clear arp-cache
To Next Page
Loading...
