DGS-6604 m show vrrp brief
CLI Reference Guide
788
show vrrp brief
This command is used to view the VRRP brief status.
show vrrp brief [ all ]
Default None
Command Mode User EXEC or any configuration mode
Usage Guideline When using the show vrrp brief command the status and parameter information
for the configured VRRPs is displayed in tabular format.
Example Below is the output of using the show vrrp brief command to view the brief
VRRP information.
The following table describes the fields in the show vrrp brief command output.
Syntax Description
all (Optional) Displays all information for all virtual routers, including virtual routers
in a shutdown state.
Switch#show vrrp brief
Interface VRID Prio Time Own Pre State Master Addr VRouter Addr
vlan1 7 255 3.003 Y Y Master 20.0.1.1 20.0.1.1
vlan1 8 200 3.218 Y Master 20.0.1.1 20.1.1.2
vlan2 5 100 3.609 Y Init 0.0.0.0 30.1.1.254
vlan3 1 80 3.687 Y Backup 50.0.1.2 50.1.1.254
Field Description
Interface Interface name
VRID Virtual router identifier
Prio VRRP priority value
Time Master down interval in seconds
Own Indicates whether the virtual router is the IP address owner. "Y" indicates it is
IP address owner.
Pre Indicates preempt mode is enabled or not. "Y" indicates preempt mode is
enabled.
State State of the virtual router
Master Address IP address of the master virtual router.
VRouter Address IP address of the virtual router.
To Next Page
Loading...
