DGS-6604 m show gvrp configuration
CLI Reference Guide
606
show gvrp configuration
Use the show gvrp command to display the settings for gvrp.
show gvrp configuration [interface INTERFACE-ID [ , | - ]]
Default None
Command Mode User EXEC or any configuration mode
Usage Guideline It only displays GVRP related configuration information.
Example This example shows how to display gvrp configuration.
Syntax Description
interface Display the gvrp settings of the interface
INTERFACE-ID (Optional) Specifies the interface to display.
, (Optional) Specifies a series of interfaces, or separate a range of interfaces from
a previous range.
- (Optional) Specifies a range of interfaces.
Switch# show gvrp configuration
Global GVRP State : Enabled
Dynamic Vlan Creation : Disabled
Switch#
To Next Page
Loading...
