DGS-6604 m show lldp neighbor interface
CLI Reference Guide
825
show lldp neighbor interface
To display the each physical interface information currently learned from the
neighbor, use the show lldp neighbor interface command.
show lldp neighbor interface INTERFACE-ID [, | -] [brief | detail]
Default Not applicable
Command Mode EXEC mode or any configuration mode
Usage Guideline This command display the information learned from the neighbor devices.
Syntax Description
INTERFACE-ID Valid interfaces must be physical.
, (Optional) Specifies a series of interfaces or separate a range of interfaces from
previous ranges. No spaces before or after the comma are permitted.
- (Optional) Specifies a range of interfaces. No spaces are permitted before or
after the hyphen.
brief (Optional) Displays the information in brief mode.
detail (Optional) Displays the information in detailed mode.
If neither brief nor detail is specified, display information is in normal mode.
To Next Page
Loading...
