DGS-6604 m show ipv6 route summary
CLI Reference Guide
723
show ipv6 route summary
To display the current state of the IPv6 routing table, use the show ipv6 route
summary command.
show ipv6 route summary
Syntax None
Default None
Command Mode User EXEC or any configuration mode
Usage Guideline None
Example The following is sample output from the show ipv6 route summary command:
Swtich#show ipv6 route summary
IPv6 routing table name is Default-IPv6-Routing-Table(0)
IPv6 routing table multi-paths state is enabled
IPv6 routing table configured maximum-paths is 6
IPv6 routing table maximum-paths is 6
Route Source Networks
connected 2
ripng 1
Total 3
FIB 3
multi-path 0
To Next Page
Loading...
