DGS-6604 m show ip ospf database router
CLI Reference Guide
668
show ip ospf database router
Use this command to display information about the router LSAs.
show ip ospf database router [LINK-STATE-ID | self-originate | adv-router IP-ADDRESS]
Default None
Command Mode User EXEC
Usage Guideline Display information about the router LSAs.
Example The following pages shows a sample output from the show ip ospf database
router command.
Syntax Description
LINK-STATE-ID Link State ID (as an IP address).
self-originate Self-originated link states.
adv-router Displays all the LSAs of the specified router.
IP-ADDRESS Advertise router IP address.
To Next Page
Loading...
