DGS-6604 m clear gvrp statistics interface
CLI Reference Guide
94
clear gvrp statistics interface
Use the clear gvrp statistics command to clear the statistics of a single port, a
range of ports or all gvrp ports.
clear gvrp statistics [ interface INTERFACE-ID [ , | -] ]
Default None
Command Mode Privileged EXEC mode
Usage Guideline This command clears the GVRP counters. If the interface-ID is not specified all
GVRP counters for all interfaces will be cleared.
Example This example shows how to clear the GVRP statistics on all interfaces.
Syntax Description
INTERFACE-ID
(Optional) Specifies the interface to be cleared. If no interface is specified the
statistics on all interfaces will be cleared.
, (Optional) Specifies a series of interfaces, or separates a range of interfaces
from a previous range.
- (Optional) Specifies a range of interfaces.
Switch# clear gvrp statistics
Switch#
To Next Page
Loading...
