DGS-6604 m show sflow
CLI Reference Guide
812
show sflow
Use the show sflow command to display the sFlow information.
show sflow [agent | receiver | sampler | poller]
Default None
Command Mode EXEC mode or any configuration mode.
Usage Guideline The keyword [agent | receiver | sampler | poller] indicates which type of sFlow
object's information to be displayed. The show sflow command without keyword
displays all types of sFlow objects' information.
Example This example shows how to display all types of sFlow objects' information. The
flow samples and counter samples of eth3.1 are sent to 10.1.1.2. The flow
samples and counter samples of eth3.2 are sent to both 10.1.1.2 and 10.1.1.3:
Syntax Description
agent (Optional) Display the sFlow agent information.
receiver (Optional) Display the information of all receivers.
sampler (Optional) Display the information of all samplers.
poller (Optional) Display the information of all pollers.
switch(config)# show sflow
sFlow Agent Version: 1.3;D-Link Corporation;2.00
sFlow Agent Address: 10.1.1.1
sFlow State : Enabled
Receivers Information
Index : 1
Owner : collector1
Current Countdown Time: 86122
Max Datagram Size : 1400
Address : 10.1.1.2
To Next Page
Loading...
