DGS-6604 m show monitor session
CLI Reference Guide
735
show monitor session
Use this command to show all or a specific port mirroring session.
show monitor session [SESSION-NUMBER | remote | local]
Default None
Command Mode User EXEC or any configuration mode
Usage Guideline If the command is entered without specifying a session number, all port mirroring
sessions are displayed.
Examples This example shows how to display a created port mirroring session with session
number 1.
This example shows how to display all the created port mirroring sessions.
Syntax Description
SESSION-NUMBER (Optional) Specify the session number which you want to display.
local (Optional) Specify to display a local session.
remote (Optional) Specify to display remote RSPAN session.
Switch# show monitor session 1
Session 1
Session Type: local session
Destination Port : eth3.1
Ingress Disable
Source Ports :
Both : eth3.2-3.4
RX : eth3.5
TX : eth3.7
Switch#
To Next Page
Loading...
