DGS-6604 m clear aaa user lockout
CLI Reference Guide
89
clear aaa user lockout
You can use this command to unlock the locked-out users.
clear aaa user lockout {username USERNAME | all}
Default none.
Command Mode Global configuration privilege at level 15.
Usage Guideline When a user fails a login/enable on the switch system, he or she will be put onto
the locked-out list. This command can be used to unlock the locked-out users.
If the USERNAME you specified doesn’t exist, an error message will be shown.
Example This example shows how to unlock a fictional user called jane, whom has been locked-
out.
You can verify your settings by entering the show aaa user locked command
Syntax Description
USERNAME Specify the name of the user who you want to unlock.
all Unlock all locked-out users
Switch(config)# clear aaa user lockout jane
The locked-out user jane is unlocked.
Switch(config)#
To Next Page
Loading...
