DGS-6604 m show ip as-path access-list
CLI Reference Guide
613
show ip as-path access-list
To display configured as-path access-lists, use the show ip as-path access-list
command.
show ip as-path access-list [ACCESS-LIST-NAME]
Default None
Command Mode User EXEC or any configuration mode
Usage Guideline This command can be used without any arguments. If no arguments are
specified, this command will display all as-path access-lists. However, the as-
path ACCESS-LIST-NAME can be specified when entering the show ip as-path
access-list command. This option is useful for filtering the output of this
command and verifying a single named as-path access-list.
Example This example shows how to display the content of IP AS path access-list
Syntax Description
ACCESS-LIST-NAME (Optional) Specifies the access list to be displayed.
Switch>Show ip as-path access-list
AS path access list A1
permit .*
AS path access list A2
permit .*
To Next Page
Loading...
