DGS-6604 m show ipv6 ospf
CLI Reference Guide
709
show ipv6 ospf
To display general information about OSPF routing processes, use the show
ipv6 ospf command.
show ipv6 ospf [PROCESS-ID]
Default If the PROCESS-ID is not specified, display all IPv6 OSPF processes.
Default PROCESS-ID: null
Command Mode User EXEC
Usage Guideline The information displayed by the show ipv6 ospf command is useful in
debugging OSPF routing operations.
Example The following is sample output from the show ipv6 ospf command.
The output after executing this command is as follows on the next page.
Syntax Description
PROCESS-ID (Optional) Internally used identification parameter for an IPv6 OSPF routing
process. It is locally assigned and can be any positive integer. A unique value is
assigned for each IPv6 OSPF routing process.
Switch > enable
Switch # show ipv6 ospf
To Next Page
Loading...
