DGS-6604 m show ip trusted-host
CLI Reference Guide
699
show ip trusted-host
Use this command to display the trusted host information on the device.
show ip trusted-host [snmp | http | https | telnet | ssh ]
Default None
Command Mode Privileged EXEC or any configuration mode at privilege level 15
Usage Guideline This command displays the trusted host information.
Example This example shows how to display trusted hosts information for all access
interfaces.
Syntax Description
[snmp | http | https |
telnet | ssh]
(Optional) Specifies which access interface which is to be displayed. If no access
interface is specified, the trusted hosts at all access interfaces will be displayed.
Switch# show ip trusted-host
Hosts Valid to Access
-------------------------------------
10.48.93.100 all access interfaces
10.51.17.1 snmp
10.52.95.90 http
Total Entries : 3
Switch#
To Next Page
Loading...
