DGS-6604 m erps
CLI Reference Guide
190
erps
Use the erps command to enable ERPS function globally. Use the no form of this
command to disable ERPS function globally.
erps
no erps
Syntax None
Default Disabled
Command Mode Global configuration mode
Usage Guideline Enable ERPS function globally will also enable all ERP instances which state are
enabled by using "erpi enable" command. And, disable ERPS function globally
will disable all ERP instances.
Example The following example shows how to enable ERPS function globally:
The following example shows how to disable ERPS function globally:
Switch(config)# erps
Switch(config)#
Switch(config)# no erps
Switch(config)#
To Next Page
Loading...
