DGS-6604 m show lldp interface
CLI Reference Guide
816
show lldp interface
To display the LLDP each physical interface configuration for advertisement
options, use the show lldp interface command in user EXEC mode.
show lldp interface INTERFACE-ID [ , | - ]
Default Not applicable
Command Mode EXEC mode or any configuration mode
Usage Guideline This command displays the LLDP each physical interface configuration for
advertisement options.
Examples The following is sample output from the show lldp interface command. To display
a specific physical interface configuration:
Syntax Description
INTERFACE-ID Displays LLDP configuration for a specific interface. Valid interfaces are
physical.
, (Optional) Specifies a series of physical interfaces. No spaces are permitted
before or after the comma.
- (Optional) Specifies a range of physical interfaces. No spaces are permitted
before or after the hyphen.
To Next Page
Loading...
