DGS-6604 m neighbor peer-group (create group)
CLI Reference Guide
447
neighbor peer-group (create group)
Use this command to create a peer group. Use the no form of the command to
remove a peer group.
neighbor PEER-GROUP-NAME peer-group
no neighbor PEER-GROUP-NAME peer-group
Default Not configured
Command Mode Router configuration
Address family configuration
Usage Guideline Often in a BGP or multi-protocol BGP speaker, multiple neighbors are configured
with the same update policies (that is, the same outbound route maps,
distribution lists, filter lists, update source, and so on).
Neighbors with the same update policies can be grouped into peer groups to
simplify configuration and make update calculations more efficient.
Example This example shows how to create a peer group named ALPHA-GROUP
Syntax Description
PEER-GROUP-NAME Name of the BGP peer group
Switch(config)# router bgp 65100
Switch(config-router)# neighbor ALPHA-GROUP peer-group
To Next Page
Loading...
