DGS-6604 m show erps domain
CLI Reference Guide
796
show erps domain
The show erps domain command is used to display information of all created
ERPS domains.
show erps domain [DOMAIN-NAME]
Default Not applicable
Command Mode EXEC mode or any configuration mode
Usage Guideline This command displays brief instance information of all created ERP instances in
an ERPS domain on a device.
Example The following example displays instance information of all created ERPS
domains when ERPS is globally disabled:
The following example displays instance information of all created ERPS
domains:
Syntax Description
DOMAIN-NAME Specifies the name of ERPS domain with a maximum of 32 characters. (Only
allow character set: ‘0-9’. ‘a-z’, ‘A-Z’ ‘-’)
Switch# show erps domain
ERPS is globally disabled
Switch#
To Next Page
Loading...
