DGS-6604 m clear ipv6 dhcp client
CLI Reference Guide
105
clear ipv6 dhcp client
This command is used to restart the DHCPv6 client on an interface.
clear ipv6 dhcp client INTERFACE-NAME
Default None
Command Mode Privileged EXEC
Usage Guideline The clear ipv6 dhcp client command restarts DHCP for an IPv6 client on a
specified interface after first releasing and un-configuring the previously acquired
prefixes and other configuration options (for example, Domain Name System
[DNS] servers).
Example The following example restarts the DHCPv6 client for interface vlan1:
Syntax Description
INTERFACE-NAME Specifies the identifier of the switch interface on which to restart the DHCPv6
client.
Switch > enable
Switch # clear ipv6 dhcp client vlan1
Success.
Switch #
To Next Page
Loading...
